JIS Z 8901 Class 3 Quartz Sand

About JIS Z 8901 Class 3 Quartz Sand

JIS Z 8901 Class 3 Quartz Sand is a laboratory-grade silica sand classified under the Japanese Industrial Standard (JIS Z 8901). It is used primarily for testing, calibration, filtration media evaluation, and particle size distribution analysis.

This quartz-based material is chemically stable, dry, and free from organic impurities. Its particle size distribution is tightly controlled to meet the requirements of Class 3 grading, as specified by JIS. Its suitable for testing in civil engineering, filter development, concrete labs, and geotechnical simulations.

Applications

• Filter Media Testing

• Calibration of Particle Size Equipment

• Soil and Geotechnical Testing

• Water Filtration and Drainage Simulation

• Civil Engineering Material Studies

• Cement & Concrete Fineness Testing

Scope : This Japanese Industrial Standard specifies both: the test powders which can be used for the dust separatio n test of a dust separtation test of a dust separator or an air filter, for the function test of various testers, and for wear test; and the test particles, which can be used for the calibration of light-scattering automatic particle counter, the test of particle collecting rate for super high performance air filter, and the calibration of an automatic counter of particulate materials floating in air.
Test powders Class 7, Class 8, and Class 11 the quality of test powders Class7, Class 8, and Class 11 (KANTO LAOM) shall conform to the following items.
Particle Density: Particle Density shall be te value of 2.9 g/cm3 to 3.1 g/cm3 when measured according to the method in test

FAQs

Q: What are Japanese Industrial Standard test powders used for?
A: They are used in dust separation tests, air filter function tests, wear tests, and other industrial evaluations.

Q: What is the specified particle density for Class 7, Class 8, and Class 11 test powders?
A: The particle density must be within the range of 2.9 g/cmi to 3.1 g/cmi, measured according to the designated method.

Q: Can these test powders be used for calibrating automatic particle counters?
A: Yes, the test particles are specifically designed for calibrating light-scattering automatic particle counters and assessing high-performance air filters.

Q: What standards do Class 7, Class 8, and Class 11 powders conform to?
A: They conform to Japanese Industrial Standards, ensuring precision and reliability for various testing applications.

Q: Are there specific industries where these powders are essential?
A: Yes, they are widely used in industries such as air filtration, automotive testing, environmental monitoring, and laboratory research.

High-Purity Quartz Sand for Laboratory Excellence

Engineered for precision and reliability, JIS Z 8901 Class 3 Quartz Sand offers a purity level of 99%. This powder-form chemical is widely used in laboratories for critical testing and calibration. Its stable nature under dry, sealed storage conditions reduces contamination risks and ensures longevity, supporting accurate and repeatable results across various industrial processes.


Manufactured and Exported from India

Produced and supplied in India, this quartz sand aligns with JIS Z 8901 Class 3 specifications, guaranteeing international quality standards. As both a manufacturer and exporter, the company ensures the product's availability for domestic and global markets, making it an accessible solution for laboratories and industries worldwide.