Oil Filter Test Equipment

Technical Specifications Parameter Specification Pressure Range 0 “ 30 bar (adjustable) Impulse Pressure Amplitude Up to 15 bar differential Test Medium Hydraulic oil / ISO VG 32 or as per requirement Test Cycles 1 to 999,999 cycles Cycle Frequency 0.5 “ 2 Hz (configurable) Temperature Control Ambient to 100C (with optional oil heater) Flow Rate 5 “ 50 L/min (variable, optional flow meter) Control System PLC + HMI touchscreen interface Data Logging Pressure, temperature, cycle count, failure point Safety Features Overpressure shut-off, emergency stop, alarms Filter Compatibility Spin-on, cartridge type (with adaptors) Power Supply 220V/415V, 50Hz (customizable)

Ÿ“ Product Specifications Field Value Standard Compliance ISO 4548-4 Test Parameters Pressure Drop, Contaminant Holding, Filter Life Flow Rate Range 0.5 to 30 L/min (adjustable) Test Fluid Type SAE 10W30 / ISO VG 32 (customizable) Differential Pressure Range 0“5 bar (±0.01 bar accuracy) Test Dust Compatibility ISO 12103-1 A2 Fine Dust / Custom Dust Blend Filtration Monitoring Inline particle counter & pressure sensors Control System PLC with HMI Touchscreen Interface Heating System Up to 120C (with PID control) Reservoir Capacity 25“50 liters Power Supply 230V/50Hz or 415V/3-Phase (custom) Data Logging USB / Ethernet-based logging and report export Safety Features Over-pressure cut-off, temperature alarms

Designed to measure reduction in visibility due to smoke generation in controlled conditions Conforms to ASTM E662 / ISO 5659-2 or similar standards Equipped with optical light sensors to measure smoke density (0“100%) Features a sealed combustion chamber with viewing window and precision light beam path Heating system allows controlled combustion up to 200C Integrated PLC-based automatic control system with data logging Touchscreen or digital display for real-time smoke data and timer Safety interlocks and exhaust port for fume extraction

Designed as per ISO 4548-9 to test the effectiveness of anti-drain back valves in spin-on filters Evaluates valve sealing, backflow prevention, and durability under thermal and pressure cycling Simulates real engine shutdown/startup conditions with timed fluid drain and reverse flow SS-304 test stand with transparent observation chamber and digital flow controller Suitable for automotive oil filters and hydraulic filters with check valve mechanisms Includes fluid heating system, flow meters, pressure sensors, and leak detection Programmable test cycles with optional data logging & auto-shutdown features Power Supply: 230V AC, 50Hz, single phase

Designed to test hydrostatic burst strength of various filter elements under pressurized fluid conditions Complies with ISO 2941, ISO 4548, and other relevant filtration standards Suitable for oil filters, fuel filters, hydraulic filters, and water filtration cartridges Test pressure range: up to 100 bar (customizable) using water or hydraulic oil Equipped with SS-304 pressure chamber, digital pressure indicator, and rupture detection Integrated high-pressure pump, safety interlocks, and pressure release system Data logging of burst pressure and time available (optional) Power Supply: 230V or 415V AC, 50Hz, single/three phase